57North Hacklab

Link to this comparison view

--- engage_space:power [2018/05/01 21:29] – hibby
+++ engage_space:power [2018/05/24 22:31] – dococassi
@@ Line 1: / Line 1: @@
+====== Distribution ======
 ====== Incoming Power ======
-Where do we get our power from, what is that cable rated to?
+We have 4 supplies on 3 different phases coming to us
+  *  6 Amp Lighting (P2)
+  *  16 Amp Water Heater (P1)
+  *  32 Amp Shower (P2)
+  *  32 Amp Ring (P3)
-====== Circuit Breaker Box ======
+The cables run to the first floor and should be tapable there to continue to a Consumer unit in the dirty workshop, the 16 could be changed for a 32. though this would require replacement of the cable.
-Our breakers are located in a box.
+Potentially we could change the breaker upstairs to 40A and use a 32A breaker in our box which would remove the risk of tripping the breaker upstairs by distributed load.
-Where is the box?
-How many breakers are there?
+====== Consumer Unit ======
-Do we leave room for expansion?
+We have a schnider Easy9 Distribution box in the hall next to the dirty workshop
-====== Ring Main ======
+====== Distribution ======
-How are we laying out the rings. How many do we have? Are they 1 per room?
+This will be done by 50mmx50mm Conduit you can see the plan for distribution below.
-====== Outlets ======
-How are we laying out the outlets, both physically (position) and electrically (which ring).
+  {{file_floorplan-conduit.png?400x0}}
@@ Line 32: / Line 40: @@
-Are we going to have certain devices on their own?
+===== Test Benches =====
+In each area have a test bench which has it's own RCBO
+===== Water Heater =====
+In bathroom and shower, can we get rid of the shower?
+===== Ventilation =====
+A Ventilation Fan and ducting
+===== Heater =====
+Supply for each room.
@@ Line 40: / Line 70: @@
 Is there anything we want in the future that should be considered early on?
-  *  Kev's Testing Setup
   *  Current consumption monitoring