Differences

This shows you the differences between two versions of the page.

--- engage_space:power [2018/05/25 07:50] – /* Distribution */ dococassi
+++ engage_space:power [2020/07/07 20:48] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+^ Organiser |
-====== Distribution ======
+|  |
@@ Line 17: / Line 17: @@
 Potentially we could change the breaker upstairs to 40A and use a 32A breaker in our box which would remove the risk of tripping the breaker upstairs by distributed load.
+I have a JB for the wall On the first floor though no terminals as jey I also have one length og 6mm cable for to provide a power for to the consumer unit below, it is run but not connected
@@ Line 23: / Line 25: @@
 We have a schnider Easy9 Distribution box in the hall next to the dirty workshop
+{{file:m2-3.jpg?400x0}}
@@ Line 32: / Line 40: @@
-  {{file_floorplan-conduit.png?400x0}}{{file_m2-3.jpg?400x0}}
+  {{file:floorplan-conduit.png?400x0}}
+===== Lighting =====
-====== Per Device Breakers ======
+see [[engage_space:lighting|Lighting]]
+The main light will be fed from a 6A Breaker, this has not bee done yet, as there is a supply form above which is seperate from out Consumer unit as yet.
-===== Test Benches =====
+===== Main Power Distributon =====
-In each area have a test bench which has it's own RCBO
+We need to see what we need, I think this should be done in 2.5mm cable with a 20A breaker for each area or by requirement, we will have to consider upstream it we require more load.