Table of Contents
Laser Cutter
Location
- Next to the 3D Printers
Hazards
Fumes from lased materials.The kit should be well ventilated when in use.High intensity laser light.The laser should not be viewed with the naked eye when in operation.Heat.The kit will release heat when in use and should be cooled and monitored.
Current State
In place
TODO
Notes
- The hardware is a Trotec Speedy100
- The maximum size of a sheet to cut is 610 x 305 mm
- Typically create designs in Inkscape
- In your design, use hairline red for cutting and black for engraving
- The manual operating-manual-speedy-100r-8063-en-us.pdf
- Service manual speedy_servicemauual.pdf
- The laser cutter is powered by a Iradion Infinity Series - 50-120 Watt Model 156F-ETN
The focus guide sits on the laser cutter like so…
Software
The software to drive the cutter is on the associated laptop.
Links
- Some useful notes https://edutechwiki.unige.ch/en/Trotec_Speedy_100R
- Trotec samples and examples https://www.troteclaser.com/en-us/learn-support/laser-projects
Photos
