User Tools

Site Tools


aeotec_minimote

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
aeotec_minimote [2018/05/06 12:09]
irl Created page with "[[Image:Aeotec_Minimote.jpg|thumb|200px|A white and black minimote]] The Aeotec Minimote is a [[Z-Wave]] remote. == Use with Home Assistant == === Including in the Z-Wave N..."
aeotec_minimote [2020/07/07 20:48] (current)
Line 1: Line 1:
-{{file_aeotec_minimote.jpg?200x0}}+{{file:aeotec_minimote.jpg?200x0}}
  
 The Aeotec Minimote is a [[z-wave]] remote. The Aeotec Minimote is a [[z-wave]] remote.
Line 13: Line 13:
 This part is tricky, you might have to retry this a couple of times. This part is tricky, you might have to retry this a couple of times.
  
-<code>* Click the "Add Node Secure" button in Home Assistant. +   Click the "Add Node Secure" button in Home Assistant. 
-* Press the Minimote button labeled Learn or Join – The blue LED will blink slowly. +   Press the Minimote button labeled Learn or Join – The blue LED will blink slowly. 
-* The blue and red LEDs will blink quickly to indicate detection of the other Z-Wave controller +   The blue and red LEDs will blink quickly to indicate detection of the other Z-Wave controller 
-* The blue LED will stay solid for 2 seconds to indicate success; the red LED will stay solid for 2 seconds to indicate failure. +   The blue LED will stay solid for 2 seconds to indicate success; the red LED will stay solid for 2 seconds to indicate failure. 
-</code> + 
-Check Home Assistant or the OZW logs to see if the inclusion was successful. +Check Home Assistant or the OZW logs to see if the inclusion was successful.
  
  
aeotec_minimote.txt · Last modified: 2020/07/07 20:48 (external edit)