57North Hacklab

User Tools

Site Tools

You are here: start » engage_space » network
engage_space:network

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
engage_space:network [2018/06/11 14:09] – andyengage_space:network [2020/07/07 20:48] (current) – external edit 127.0.0.1
Line 1: Line 1:
  
-====== Incoming Network ======+We are currently in the process of leaving [[engage_space]] behind, but for now we still need to have a residual network to allow the operation of [[doorbot]] and also to support co-ordination of the move (lack of mobile data signal in the social room and stairwell).
  
  
-How do we get network from Engage? We need cable details!+====== Residual network ======
  
  
-====== Main Room Network ======+The network has been pulled back to a minimal configuration. Nothing contained within the racks is critical to the operation of the residual network and can safely be disconnected. There are 3 devices that should not be unplugged. These are:
  
 +  *  BT OpenReach Modem - found above the food elevator
 +  *  APU3 board, labelled bennachie - window sill in dirty workshop
 +  *  Wireless AP, Netgear - window sill in dirty workshop
  
 +These are shown below:
  
-===== Outlet Locations ===== +{{file:engage_space_resnet_router.jpg?160}}{{file:engage_space_resnet_router_power.jpg?160}}{{file:engage_space_resnet_modem.jpg?160}}
- +
- +
- +
-===== WLAN ===== +
- +
-Existing dual band router +
- +
- +
-====== Workshop Room Network ====== +
- +
- +
- +
-===== Outlet Locations ===== +
- +
- +
- +
-===== WLAN ===== +
- +
-Shared with Main Room +
- +
- +
-====== Upstairs Room Network ====== +
- +
- +
- +
-===== Outlet Locations ===== +
- +
- +
- +
-===== WLAN Option ===== +
- +
-2.4GHz Router wired to Outlet+
  
 +In the event (entirely likely during tear down) that you accidentally unplug something, do not panic! Plug it back in. irl has tested this and the network does come back. Please try to avoid doing it unnecessarily though.
  
 +The WiFi continues to function as before, we are still using the Converged VDSL which will be terminated at the end of October, and there is still a GRE tunnel between HackHub and the space network to allow for doorbot's functions.
  
  
Line 54: Line 28:
  
 ===== Kitchen ceiling route notes ===== ===== Kitchen ceiling route notes =====
 +
  
 Some basic notes to help us find the cable route in the ceiling if we need it. Some basic notes to help us find the cable route in the ceiling if we need it.
Line 59: Line 34:
 **Hop 1**: The first hop goes through the one tile, then skips 3 tiles, and turns 90 degrees left above the forth tile. **Hop 1**: The first hop goes through the one tile, then skips 3 tiles, and turns 90 degrees left above the forth tile.
  
-{{file_ceiling_cable_hop_1a.jpg?500x0}}+{{file:ceiling_cable_hop_1a.jpg?300x0}}
  
 **Hop 2**: The second hop skips 6 tiles and, above the tile just before a light fitting turns 90 degrees right. **Hop 2**: The second hop skips 6 tiles and, above the tile just before a light fitting turns 90 degrees right.
  
-{{file_ceiling_cable_hop_2a.jpg?500x0}}+{{file:ceiling_cable_hop_2a.jpg?300x0}}
  
-{{file_ceiling_cable_hop_2b.jpg?500x0}}+{{file:ceiling_cable_hop_2b.jpg?300x0}}
  
-{{file_ceiling_cable_hop_3a.jpg?500x0}}+{{file:ceiling_cable_hop_3a.jpg?300x0}}
  
 **Hop 3**: The third hop skips 6 tiles and then turns about 45degrees left. **Hop 3**: The third hop skips 6 tiles and then turns about 45degrees left.
  
-{{file_ceiling_cable_hop_4a.jpg?500x0}}+{{file:ceiling_cable_hop_4a.jpg?300x0}}
  
 **Hop 4**: The forth hop takes the cable into the lower ceiling of the Engage office. **Hop 4**: The forth hop takes the cable into the lower ceiling of the Engage office.
 +
 +
  
engage_space/network.1528726168.txt.gz · Last modified: 2020/07/07 20:48 (external edit)