Projects:Laser Cutter

From 57North Hacklab

Revision as of 13:26, 12 March 2019 by Nordin (talk | contribs) (Proposed new location)

Laser Cutter
Description The space laser cutter
People
Theme Infrastructure
Website
Status Active


Location

  • Upper Floor, on the camping desk.

Hazards

  • Fumes from lased materials. The kit should be well ventilated when in use.
  • High intensity laser light. The laser should not be viewed with the naked eye when in operation
  • Heat. The kit will release heat when in use and should be cooled via ice (as presently set up)

Notes

  • The hardware is KH-3020 'Laser Engraving Machine'.
  • Dimensions: Width 810mm x depth 510mm x height 260mm (at highest)
  • The note 'Vinyl: 80mm/s 50%' is written on the machine's body
  • It is water cooled via water cooled with ice
  • The cut size is approx A4.
  • Ventilation is achieved via a fan and a length of approx 3m of large tubing that exits the machine rear
  • A new cooling solution is in development, together with a provision for better ventilation.

Proposed new location

Wireframe shown includes rear fanblock
  • It has been proposed that the cutter is moved to under the left-side window, near to entrance to the floor toilet.
  • Ventilation and cooling is a better fit here
  • More out the way