Differences

This shows you the differences between two versions of the page.

--- projects:3d_printer [2020/12/10 11:36] – [How to 3D print an STL] hibby
+++ projects:3d_printer [2020/12/10 11:43] – [About the Space 3D Printer] hibby
@@ Line 7: / Line 7: @@
-The lulzbot has been setup next to the Kossel 3D printer and connected to power and a Dell laptop.  There are printed instructions located to the side of the printer and new users are recommended to read these before using the printer. These are also available online.
+The lulzbot is connected to power and a laptop.  There are printed instructions located to the side of the printer and new users are recommended to read these before using the printer. These are also available online.
   * [[http://download.lulzbot.com/Mini/1.0/documentation/Mini_Poster_11x17.pdf|Reference poster]]
@@ Line 16: / Line 16: @@
 ===== How to 3D print an STL =====
-Currently, the LulzBot is connected to a laptop running Fedora. There is a 'Lulzbot' labelled USB stick with cross-platform Cura software installers should users wish to use their own laptop for slicing and printing. An Octopi setup is currently being built to allow for a webgui. Updates will follow.
+Currently, the LulzBot is connected to a laptop running Fedora with Gnome 3. There is a 'Lulzbot' labelled USB stick with cross-platform Cura software installers should users wish to use their own laptop for slicing and printing. An Octopi setup is currently being built to allow for a webgui. Updates will follow.
 ==== Preliminary Checks ====