Differences

This shows you the differences between two versions of the page.

--- projects:hackyleds [2020/04/18 21:55] – [Notes] hibby
+++ projects:hackyleds [2022/09/07 13:31] (current) – hibby
@@ Line 4: / Line 4: @@
 ===== Location =====
-* 2x installed and in use in the ceiling; one flood and one strip light.
+  * 2x installed and in use in the ceiling; one flood and one strip light.
-* 2x stored unused under the left-side desk in the social room; one flood and one strip light.
+  * 2x stored unused under the left-side desk in the social room; one flood and one strip light.
 ===== Safety Hazards =====
-* The LEDs should be used only in ventilated areas that allow heat to dissipate.
+  * The LEDs should be used only in ventilated areas that allow heat to dissipate.
 ===== Notes =====
   * Powered via 12v, ran over an ESP8266 plugged into variboard soldered with FETS, hosted inside a white 'blokbox'.
-  * Controlled using MQTT over Wifi on a ESP8266 running Micropython and custom code ([[https://github.com/Nordln/HackyLEDS View on Github]])
+  * Controlled using MQTT over Wifi on a ESP8266 running Micropython and custom code ([[https://github.com/Nordln/HackyLEDS]])
   * Currently stowed in a clear box until refitted.
-{{tag>project active software electronics nordin}}
+{{tag>project dormant software electronics nordin}}