Differences

This shows you the differences between two versions of the page.

--- projects:laser_cutter [2022/12/01 16:21] – andy
+++ projects:laser_cutter [2022/12/03 18:03] (current) – andy
@@ Line 15: / Line 15: @@
 ===== TODO =====
-  * Set laptop with print spool driver.
+  * Fix laser issue - [[https://lists.57north.org.uk/mailman3/hyperkitty/list/57north-discuss@lists.57north.org.uk/thread/Z4ADFBYKVDTL5YQCNAQZAL7AZIRCH7OS/]]
@@ Line 21: / Line 21: @@
 ===== Notes =====
   * The hardware is a Trotec Speedy100
+  * The maximum size of a sheet to cut is 610 x 305 mm
+  * Typically create designs in [[https://inkscape.org/|Inkscape]]
+  * In your design, use hairline red for cutting and black for engraving
   * The manual [[https://wiki.57north.org.uk/lib/exe/fetch.php?media=projects:operating-manual-speedy-100r-8063-en-us.pdf|operating-manual-speedy-100r-8063-en-us.pdf]]
+  * Service manual {{ :projects:speedy_servicemauual.pdf |}}
+  * The laser cutter is powered by a [[https://www.iradionlaser.com/en/ceramic-co2-laser-tubes/infinity-series-50-120-watt|Iradion Infinity Series - 50-120 Watt]] Model 156F-ETN
-The focus guide sits on the lase cutter like so...
+The focus guide sits on the laser cutter like so...
 {{:projects:laser_cutter_focus_guide.jpg?400|}}
@@ Line 34: / Line 40: @@
   * Some useful notes [[https://edutechwiki.unige.ch/en/Trotec_Speedy_100R]]
   * Trotec samples and examples [[https://www.troteclaser.com/en-us/learn-support/laser-projects]]
+  *