Differences

This shows you the differences between two versions of the page.

--- projects:3d_printer [2020/12/10 11:43] – [About the Space 3D Printer] hibby
+++ projects:3d_printer [2022/09/07 20:26] (current) – [Configuration Settings] hibby
@@ Line 6: / Line 6: @@
 {{file:432px-lulzbot-mini.jpg?|left| LulzBot Mini, Source: lulzbot.com}}
+Our printer is a Lulzbot Mini.
 The lulzbot is connected to power and a laptop.  There are printed instructions located to the side of the printer and new users are recommended to read these before using the printer. These are also available online.
@@ Line 16: / Line 17: @@
 ===== How to 3D print an STL =====
-Currently, the LulzBot is connected to a laptop running Fedora with Gnome 3. There is a 'Lulzbot' labelled USB stick with cross-platform Cura software installers should users wish to use their own laptop for slicing and printing. An Octopi setup is currently being built to allow for a webgui. Updates will follow.
+Currently, the LulzBot is connected to a laptop running Fedora with Gnome 3. There is a 'Lulzbot' labelled USB stick with cross-platform Cura software installers should users wish to use their own laptop for slicing and printing.
 ==== Preliminary Checks ====
@@ Line 131: / Line 132: @@
  ''M500''
+Black PVC Bed Z Offset: -0.45
+Glass only Z Offset: -1.33
 ===== Links =====
@@ Line 137: / Line 141: @@
 * [[https://www.lulzbot.com/learn/tutorials/Z-axis-offset#get-offset|Get the z axis offset]]
-{{tag>project active tools}}
+{{tag>resources tools infrastructure making}}
+Notes about [[other 3D printers|Other 3D printers in the space]]