HackyLEDs was/is LED lights with homemade controllers that were kept in the upper floor of engage_space

* 2x installed and in use in the ceiling; one flood and one strip light. * 2x stored unused under the left-side desk in the social room; one flood and one strip light.

* The LEDs should be used only in ventilated areas that allow heat to dissipate.

• Powered via 12v, ran over an ESP8266 plugged into variboard soldered with FETS, hosted inside a white 'blokbox'.
• Controlled using MQTT over Wifi on a ESP8266 running Micropython and custom code (https://github.com/Nordln/HackyLEDS)
• Currently stowed in a clear box until refitted.