projects:laser_cutter
This is an old revision of the document!
Table of Contents
Laser Cutter
Location
- Next to the 3D Printers
Hazards
Fumes from lased materials.
The kit should be well ventilated when in use.High intensity laser light.
The laser should not be viewed with the naked eye when in operation.Heat.
The kit will release heat when in use and should be cooled and monitored.
Current State
In place
TODO
- Set laptop with print spool driver.
Notes
- The hardware is a Trotec Speedy100
Software
The software to drive the cutter is on the associated laptop.
projects/laser_cutter.1662556569.txt.gz · Last modified: 2022/09/07 13:16 by hibby