• Next to the 3D Printers

• Fumes from lased materials. The kit should be well ventilated when in use.
• High intensity laser light. The laser should not be viewed with the naked eye when in operation.
• Heat. The kit will release heat when in use and should be cooled and monitored.

In place

• Fix laser issue - https://lists.57north.org.uk/mailman3/hyperkitty/list/57north-discuss@lists.57north.org.uk/thread/Z4ADFBYKVDTL5YQCNAQZAL7AZIRCH7OS/

• The hardware is a Trotec Speedy100
• The maximum size of a sheet to cut is 610 x 305 mm
• Typically create designs in Inkscape
• In your design, use hairline red for cutting and black for engraving
• The manual operating-manual-speedy-100r-8063-en-us.pdf
• Service manual speedy_servicemauual.pdf
• The laser cutter is powered by a Iradion Infinity Series - 50-120 Watt The focus guide sits on the laser cutter like so... {{:projects:laser_cutter_focus_guide.jpg?400|}} ==== Software ==== The software to drive the cutter is on the associated laptop. ==== Links ==== * Some useful notes [[https://edutechwiki.unige.ch/en/Trotec_Speedy_100R
• Trotec samples and examples https://www.troteclaser.com/en-us/learn-support/laser-projects