resources:electronics:start
This is an old revision of the document!
Table of Contents
Electronics
Sometimes it is fun to experiment with electronics. There is a range of electronics tools available in the space, along with a range of useful electronic components.
List of Related Tools
List of Projects
Giant Robot Arm | Giant Robot Arm Some notes on the Microbot Alpha II (or 'Teachmover') robot arm. Electronics The base of the arm contains one PCB, marked “Microbot Inc. Alpha Motor Drive Assy: 10131 Rev A” (serial 636). It contains 12 single-phase stepper drivers (a combination of RIFA and ST PBL3717 ICs), as well as two LM339N quad comparator ICs. |
HackyLEDs | HackyLEDs HackyLEDs was/is LED lights with homemade controllers that were kept in the upper floor of engage_space Location * 2x installed and in use in the ceiling; one flood and one strip light. * 2x stored unused under the left-side desk in the social room; one flood and one strip light. |
LED Ping Pong Pong | LED Ping Pong Pong We were going to create a pong game, that could use an array of LEDs as a screen. Rob made an awesome LED array. [300px] And some code for it <https://github.com/ormiret/micropython/blob/master/send-udp.py> The code is living in <https://github.com/hackerdeen/pong> though it's not finished yet. Notes from IRC... actually that reminds me, andygasman: I |
RAD Robot | RAD Robot There is a Robot, a Toymax RAD from 1998, which is missing a controller (49Mhz). It could be a project someone to work on. Some maybe useful links... * <https://robotsupremacy.fandom.com/wiki/R.A.D._1.0> * <http://radhack.blogspot.com/> * <https://www.theoldrobots.com/rad.html> * <https://community.robotshop.com/forum/t/rad-1-0-hack-airsoft-battle-droid-by-josh-starnes-powered-by-ez-robot/5869> project dormant electronics |
Stem Project Ideas | Stem Project Ideas This is a page for STEM project ideas, things we can do as workshops or at events like MayFest, TechFest, IET open doors day and such like. This is a place for everything from raw ideas to completed projects. It was created after a mailing list thread, see |
List of Workshops
Battle Brushbot Workshops | Battle Brushbot Workshops OpenSCAD code: //Facet Number $fn=100; difference () { // £1 coin model translate([0, 0, 0]) cylinder(h = 3.15, r1 = 11.25, r2 = 11.25, center = false); translate([0, 8, 0]) cylinder(h = 4.15, r1 = 1.5, r2 = 1.5, center = false); // Letters scale([1,1,-5]) rotate([0, 0, 0]) translate([-4, -6,-0.8]) linear_extrude(1) text("E", font="Liberation mono:style=Bold"); } |
Make it Glo | Make it Glo 150px|thumb|right|An early concept sketch showing the end-product idea of the workshop, the 'MakeIt-Glo' Let free your creativity whilst gaining hands-on experience programming embedded micro-controllers. MakeIt-Glo is a three hour electronics introduction workshop where you'll build a flexible, freestanding set of high-powered colour 'pixels' based on the WS2812B LED-on-a-chip. These pixels are a brighter version of popular [ |
List of Articles
Related Links
resources/electronics/start.1587504843.txt.gz · Last modified: 2020/07/07 20:48 (external edit)