Difference between revisions of "Projects:Doorbot"

From 57North Hacklab

(Link to parts page)
(Doorbot Version I've lost count)
Line 19: Line 19:
 
Based on Arduino-Nanode with an RFID Reader. this will take over from the older doorbot and remove the need for a PC, connecting straight to the network and holding card details on the Nanode.
 
Based on Arduino-Nanode with an RFID Reader. this will take over from the older doorbot and remove the need for a PC, connecting straight to the network and holding card details on the Nanode.
  
== Doorbot Version I've lost count ==
+
== Doorbot Version 3 ==
 +
Don't ask
 +
 
 +
== Doorbot Version 4 ==
  
 
At the new space we built a new doorbot.  
 
At the new space we built a new doorbot.  

Revision as of 19:10, 13 April 2019

Doorbot
Description Doorbot - Door Entry System
People User:DocOcassi
Theme Infrastructure
Website
Status Active

Uses an ASRock PC with an Arduino Deumilanove for the door control.

Networking is a static IP set in `/etc/network/interfaces` using the space's public allocation, address *.106. Upstream router is *.105

Originally build by Ormiret and working well with a web interface to open the door.

516px-Doorbot.svg.png

Doorbot Ver. 2

In Progress

Based on Arduino-Nanode with an RFID Reader. this will take over from the older doorbot and remove the need for a PC, connecting straight to the network and holding card details on the Nanode.

Doorbot Version 3

Don't ask

Doorbot Version 4

At the new space we built a new doorbot.

HW in the space is now a Raspberry pi zero W with a GPIO pin connected to a relay module switching 12V to the strike release plate.

This is again controlled from button in hackhub or sending a text message with an unlock code.

There are plans to put doorbots on more doors and there are new plans to add card readers...

Many (all?) parts have been bought for the new Doorbot and are in the Doorbot box next to members project boxes.